need help ASAP my jobs on the line!

extra 8 grand a month? what do you do?

also how much of the total harness did you put in?

i say you have a pinched wire some were

i work in a gold mine as a driller helper.. anyways how can i tell if theres a pinched wire? I installed all the harness...all the way to the computer..i will check again all the grounds..

Had this problem on an Xb, the light sockets in the rear tails weren't making a conection and when I pushed the brake pedal then the dash would light up. Check your bulbs, I also agree on checking the connections coming into the lights. Somethings not right if wires are melting. I'd probably stop the putting fuses in and waiting til they pop method of checking for issues. Maybe use a multimeter? I'm not real good with electrical either. Good Luck!

ok so i couldnt find the problem with the wireing so i just disconnected the wires that kept frying and ran a wire off my running lights to the passenger side where the wire kept blowin the fuse somehow. i will have a certified electrician look next week.

"No problems til your on the freeway doin 80 and a line blows, DRAG IT"

THIS MIGHT SOUND FUNNY BUT HAVE YOU TRIED CHANGING THE BRAKE LIGHT BULBS INCLUDING THIRD BRAKELIGHT IF EQUIPPED? I HAVE SEEN BULBS SHORT AND CAUSE THIS

naww bulbs are brand new it pops the fuse evrytime i plug the front passenger side running light in. ive changed wiring harnesses and stillsame thing. by the way they are clear corners....screw it i give up TRUCK IS FORSALE!

I had the same issue right after my truck got bodydroped. I took it to a mechanic that specialized in electrical. It was only $150 to fix everything. Somethings are better left to the pros. Sure beats paying $150 for 36 months. Or worse yet getting another truck with more expensive problems. Could always top the cake and have a lemon and payments?

I have a buddy of mine with a mazda as well with the clear corners. Problem was one of his bulbs from the right side was touching ground...