2000 f150 / expedition control arms

based on what i've seen for a 2000 expedition you have to modify the control arms if you are planning to lay frame, if I bought the djm uppers and lowers would that be sufficient to lay frame, and what are my other front end options. Thanks for any help.

all you need to do is flip the lowers and raise the uppers

djm lowers raise uppers and notch for tie rods and you can add a drop spindle will lay out hard on a 22

JUST WHAT CHRIS SAID

pm me if interested but i have uppers and drop spindles that i need to sell

just to make sure i understand chris, i dont need uppers just lowers and spindles?

I just flipped my Lowers, raised my uppers 2 inches, no spindle, truck laid frame hard...no notching, is your expy awd, and you gettin rid of it

well im not that handy with a welder so im tryen to do the front my self, so as much bolt on as possible that way all i will have to pay for is the rear to be done

?

Originally posted by 22dragn



djm lowers raise uppers and notch for tie rods and you can add a drop spindle will lay out hard on a 22

after reading this over it made better since, can some one give me some info on raising the upper control arms, some pics would be great, any help would be nice im trien to spend my stimulus check asap