K
87 b2200 wheel ?
element1520
+1y
Whats up guys i have a 87 b2200 in the shop ready to bag and bd it on 20 X 8.5 KMC slides and was wondering what offset i would need? O and im keeping the 6 lug. Any help is appriciated
bagd98nisan
+1y
come on someone has to know what offset id need
kaoss
+1y
20x 8.5?
I'm going to guess around +45 or more, especially if you are going to keep the stock rear axle. Some one please correct me if I'm wrong.
I'm going to guess around +45 or more, especially if you are going to keep the stock rear axle. Some one please correct me if I'm wrong.
flameds10(tyler)
+1y
i had a set of 20X8.5 with a +40 offset with a 225/30/20 tire with a 2 inch bd on my maz and in the back the tire just barely rubbed on the upper bodyline on the inside of the bed, i would think you could possibly get away with a +45 offset
dssur
+1y
Originally posted by FlamedS10
i had a set of 20X8.5 with a +40 offset with a 225/30/20 tire with a 2 inch bd on my maz and in the back the tire just barely rubbed on the upper bodyline on the inside of the bed, i would think you could possibly get away with a +45 offset
didnt you have 4x4 fenders?
you need +50 for an 8.5 That is based on needing +37 on a 7.5, adding an inch of width adds 1/2 inch on both sides of the wheel center, you only need to compensate for the outside 1/2 inch increase, 1/2 inch is roughly 12.5mm, so 37+12.5 = right at 50.
The front can tuck less offset because of camber, but the back always needs a little more. Something tells me KMC doesnt make anything over about a 20mm offset though.
i had a set of 20X8.5 with a +40 offset with a 225/30/20 tire with a 2 inch bd on my maz and in the back the tire just barely rubbed on the upper bodyline on the inside of the bed, i would think you could possibly get away with a +45 offset
didnt you have 4x4 fenders?
you need +50 for an 8.5 That is based on needing +37 on a 7.5, adding an inch of width adds 1/2 inch on both sides of the wheel center, you only need to compensate for the outside 1/2 inch increase, 1/2 inch is roughly 12.5mm, so 37+12.5 = right at 50.
The front can tuck less offset because of camber, but the back always needs a little more. Something tells me KMC doesnt make anything over about a 20mm offset though.