will my front lay if?

you can flip ball joints and use drop spindles to lay 20s. Loosing the sway bar wont do much if you use 4 valves up front. two for each side. You will also have to pie cut the upper controls to get rid of the ball joint binding

we layed mine on 20's using aim spindles and reanglinging the upper control arm, and when using the spindles u no longer flip the ball joints. if i were to start over i woulda z'd the frame instead of using spindles

is there anything else you have to do when flipping your balljoints or do you just unbolt them and bolt them in upside-down basically

you actually dont flip it over. you grind off the hump on the control arm and move the ball joint on top of it.with the ball joint still facing down

how to flip balljoints step by step with pics

http://www.mazdabscene.com/forums/viewtopic.php?t=5270