rack and pinnion

192 views
2 replies
3 following
K
rack and pinnion
pnktco avatar
pnktco
+1y
im wanting to put rack and pinion power steering on my 91 toyota pickup, but the kits ive seen on jegs are for mustang 2's and pintos. how do i know which one to get. the frame is all handbuilt and im using toyota drop spindles if that helps.
lunatiksblazer avatar
lunatiksblazer
+1y
Bare with me im posting this from my cell phone. If you draw a line from the from your upper control bolt to the lower control arm bolt at the frame. The inner tie rod should fall that line. Therefore a little match (cad would help) you need a rack that is wide enough for that to happen. Alright ill check back once i get out of class cause my teacher is giving me the evil eye.
bdroppeddak avatar
bdroppeddak
+1y
well if you are building a custom frame, im assuming you know what needs to go where, so order a rack from unisteer that matches what you need.....