K
What gauge metal to use on floor of cab?
keele
+1y
What gauge metal are you guys using on your floors in your cab. 16 gauge or 18 gauge?
lowdyme
+1y
i used 16 gauge
dragthatbitch
+1y
16 or 14, it all depends on the structure under it.
keele
+1y
It will just be going over where I had to channel thru my cab alittle. The frame is only about 1/2" to 3/4" thru
jdauer02
+1y
I used 16 ga. with 3/4 square stock under it and its very strong. you should be good with 16.
CiViS300
+1y
16 ga. is more than enough you could even use 18 ga. and roll some beads in it to give it that extra strength.