I've been rocking my little Thomas for 8 years. Aside from freezing solid a couple times this winter, It's worked great.
ive had one from MIC for 4 years, it survived hurricane katrina uncovered in N.O. east boy and i have yet to put my pressure switch on :/
well your problem is buying a bagged truck from some one its best to do your own sh*t but thats just me
I'm running 2 AZs, at 180psi. The first two were under the bed, the second two were in the bed. Check valves are in it, no water traps though. I went threw and the wiring is fine.
The first two were the recalled AZs, the second two werent. I see an EDC in my future.
Check your wiring something is wrong.. 1 comp goes bad maybe the comp 2 goes bad might be the comp but look for other bad connections. 3-5 comps your wiring is bad...........
What was failed to mention was also if you run your compressors alot, theyll burn out which also might be your prob. Find a compressor that is a 100% cycle. But thats not going to say there not going to go out either, if you abuse compressors, they will go out, Not saying cheap compressors wont do the right job for you but spend the extra money to get a good compressor.
Also, what gauge wire do you have going back the the air zenith's? They pull a good amount of current so if your only feeding them with like a 12 gauge wire, you might be putting a strain on them by restricting their current draw.
Originally posted by BK2LIFE
Mini Trucks Are GAY!....
thats enough to get shot
He uses it to get our attention just to talk about his POS compressors
One word to solve your problem... NITROGEN!
Originally posted by Snakesunlimited
One word to solve your problem... NITROGEN!
WORD !!!!!