i have a 94' chevy c1500 and its not getting any spark i put a new MSD Blaster GM Coil and a Accel ignition control module and MSD Distributor Cap and Rotor and still nothing anyone got any ideas for me???? its a 5.7 350 tbi thanks
NOT TRYING TO BE A D--K BUT DID YOU HAVE SPARK BEFORE THE INGNITION UPGRADE
no thats why i got it all
Um is the distributer turning at all? Just a suggestion...hopefully your timing chain didnt snap.
WHAT WRE YOU DOING WHEN IT QUIT OR DID IT JUST NOT START ONE DAY
i started it up and it ran for about a 15sec and then it stoped and wouldnt start again
PULL YOUR DIST CAP AND MAKE SURE YOUR ROTOR IS TURNING IF NOT TIMING CHAIN OR DIST GEAR IF IT IS TURNING CHECK FOR POWER TO THE COIL GET A WIRING DIAGRAM AND FOLLOW YOUR POWERS AND GROUNDS CHECK ALL
ya its turning i just went out and looked
are you getting spark at the plug?to check pull the plug from cyl #1 and hook it up to the spark plug wire and hold the plug so that it is touching a pc of the motor if you got spark there then it maybe the fuel pump took a crap.did you remove the dist? if you did are you maybe 180 degrees out
MY STATEMENT WAS ASSUMING THAT YOU ARE NOT GETTING SPARK ANYWERE IF YOUR COIL IS PRODUCING A SPARK YOU NEED TO CHECK YOUR CAP AND WIRES AND IF YOU ARE GETTING SPARK TO THE PLUGS LIKE LONGNLOW SAID CHECK FOR FUEL PRESSURE