c10 lower bag plate on front question

was wondering if just using the suicide doors flat round plate in lower a arm will be a problem. the bag looks like it will rub on edge of a arm any advice

build a higher cup, or modify the arm. The bag will fail in time if its rubbing. But you probably knew that.

I think IF Customs runs the bag in the lower control arm with no plate or cup. I think i saw this on the Matt Eye and/or chris' 67

i chopped the cup all the way down in mine. I have the plate on the upper part. The bag sits into the bottom A arm when layed out...

I run SS RE7s

Originally posted by DLYDRGR



I think IF Customs runs the bag in the lower control arm with no plate or cup. I think i saw this on the Matt Eye and/or chris' 67

thats what i did i welded a round plate to my lower control arm because the bracket like ssd has didnt lay low enough for me

i used the the kit from suicidedoors and firestone 2600 and it only rubs when its all the way down