juice setups

2686 views
36 replies
20 following
K
juice setups
shavedmax avatar
shavedmax
+1y
Originally posted by Chopped Mazda



here ya go shavedmax





thanks taylor.

jeebus @ mmw avatar
jeebus @ mmw
+1y
ill elaborate more on the bags when i get finished making this new set, those ones in the picture i will auctually be using in the front as a coil over setup.

granth avatar
granth
+1y
cant wait to see it, something for me to think about
BaggedMazda87 avatar
BaggedMazda87
+1y
I know people know what holds em in place!

Come on it's killin me, i hate not understandin stuff



HarryBalls avatar
HarryBalls
+1y
Originally posted by BaggedMazda87



I know people know what holds em in place!

Come on it's killin me, i hate not understandin stuff





if you look at the cylinder you will see a collar at the bottom where the ram comes out.....you can either slide a donut over the cylinder body to rest against that collar and then a coil spring that rests on the donut and the other end against the bottom part of the mount/bracket....or.....if the setup has accumulators you would just slide a spacer (piece of tubing)that fits snugly around the cylinder body to sit between the collar and top mount. Make sense now?
3wheelinyota avatar
3wheelinyota
+1y
wow that wagon gets a sick ass standing 3 when the front wheel is in the air.. aha u must have a shit load of weight in the back of that thing..
BaggedMazda87 avatar
BaggedMazda87
+1y
Edited: 2/9/2007 12:18:33 AM by BaggedMazda87

Originally posted by HarryBalls



Originally posted by BaggedMazda87



I know people know what holds em in place!

Come on it's killin me, i hate not understandin stuff





if you look at the cylinder you will see a collar at the bottom where the ram comes out.....you can either slide a donut over the cylinder body to rest against that collar and then a coil spring that rests on the donut and the other end against the bottom part of the mount/bracket....or.....if the setup has accumulators you would just slide a spacer (piece of tubing)that fits snugly around the cylinder body to sit between the collar and top mount. Make sense now?



So that collar jus sits on the sleeve?

Wouldn't it rattle goin over bumps??

Since nothing holds it tight to the sleeve...?

Anyway thanks balls

post photo
baggedtoy93 avatar
baggedtoy93
+1y
Originally posted by BaggedMazda87



I know people know what holds em in place!

Come on it's killin me, i hate not understandin stuff





maybe this will help
juicedwagon avatar
juicedwagon
+1y
^^^ thats a coil-under settup. copped is doin a coil-over.
dragginncrds avatar
dragginncrds
+1y
Edited: 2/9/2007 12:27:38 PM by drpd2perfection

here is mine... 2 reds pumps 4 carquest marine batteries

post photo