narrowed rearend....?

3935 views
21 replies
9 following
K
narrowed rearend....?
bill brasky avatar
bill brasky
+1y
So I talked to a guy in town today and he is gonna narrow my rearend for 400...beats the hell out of the grand I seen the 3/4 tons listed on car-part.com.


So the question do I narrow it 2 inches on both sides?

Im thinkin it should be more like three or four
maz89 avatar
maz89
+1y
for what? 22's?
lockone avatar
lockone
+1y
At least 3 or 4 " per side.
huskerdually avatar
huskerdually
+1y
Is that just the housing or can he narrow the axleshafts also? Who is he for future reference?
bill brasky avatar
bill brasky
+1y
He is doing the housing and shafts

it is RF Machine up here in norfuck
huskerdually avatar
huskerdually
+1y
I'll have to keep that in mind in case I need to narrow mine.
guilty by design avatar
guilty by design
+1y
Are you gonna center your pinion while your at it? That will cause you to have to shorten one side more than the other.
liljlowrider avatar
liljlowrider
+1y
you need to narrow it at least 7 inches
pig rig avatar
pig rig
+1y
my stock rear masures 55 3/4" from backing plate to bp and the P30 rear is about 44" from bp to bp
liljlowrider avatar
liljlowrider
+1y
yea you want it to be about 44" from bp to bp