what do i need to fit 24's on 2006 gmc 1500 bagged
676 views
25 replies
16 following
K
what do i need to fit 24's on 2006 gmc 1500 bagged
1sick7
+1y
Edited: 10/16/2006 8:28:42 PM by 1sick7
Edited: 10/16/2006 8:27:35 PM by 1sick7
not to jack your thread,i have a 92 c-1500 do you have to shorten the Control arms to fit 24's on the front its just bagged
Edited: 10/16/2006 8:27:35 PM by 1sick7
not to jack your thread,i have a 92 c-1500 do you have to shorten the Control arms to fit 24's on the front its just bagged
CHOSN1
+1y
^^^^ I second that
CadeCustoms
+1y
damn, cant anyone give the guy some insight into what the question he was asking??? instead of everyone talking bout someone elses truck??
mississippirob
+1y
If you run a 2" drop spindle you should clear the booster as long as your 24 isn't too wide. Other than that, you've gotta move everything off of the fenderwells. Computer, fuse box, washer reservoir and overflow reservoir. Stock hood hinges may hit with a 24. I dont remember, the last one I did I built a whole new inner fender so the hinges had to go. I can email you pics if you'd like
03on22s
+1y
With my 22's I had a lot of clearance with my brake booster. I had 265/35/22's, I really didn't see running into a brake booster clearance issue.
CHOSN1
+1y
Originally posted by CIMLAFNATU
damn, cant anyone give the guy some insight into what the question he was asking??? instead of everyone talking bout someone elses truck??
If i knew I would tell ya. I'm just trying to keep the thread alive so in hopes someone WILL answer his question
damn, cant anyone give the guy some insight into what the question he was asking??? instead of everyone talking bout someone elses truck??
If i knew I would tell ya. I'm just trying to keep the thread alive so in hopes someone WILL answer his question
JeromeGMC
+1y
Originally posted by mississippirob
If you run a 2" drop spindle you should clear the booster as long as your 24 isn't too wide. Other than that, you've gotta move everything off of the fenderwells. Computer, fuse box, washer reservoir and overflow reservoir. Stock hood hinges may hit with a 24. I dont remember, the last one I did I built a whole new inner fender so the hinges had to go. I can email you pics if you'd like
not too wide dont 24's only come in 24x10
If you run a 2" drop spindle you should clear the booster as long as your 24 isn't too wide. Other than that, you've gotta move everything off of the fenderwells. Computer, fuse box, washer reservoir and overflow reservoir. Stock hood hinges may hit with a 24. I dont remember, the last one I did I built a whole new inner fender so the hinges had to go. I can email you pics if you'd like
not too wide dont 24's only come in 24x10
SoLow03
+1y
Maybe if you buy a regular run of the mill chrome 24. If you go with billet I'm sure you can get at least a 24x9 or so...may cost a little more but at least you know they'll be right.
Chris
Acro Texas
Chris
Acro Texas
ScrapinChevy00
+1y
Edited: 11/7/2006 9:44:23 PM by ScrapinChevy00
i believe Ekstensive did an Avalanche stock floored on 26s a couple years ago with stock hood, avalanche has same front end as a new chevy truck. then they did the escalade with the stock hood b/d on 26s but not sure if the escalade hood sits any higher than a chevy/gmc hood or not.
i believe Ekstensive did an Avalanche stock floored on 26s a couple years ago with stock hood, avalanche has same front end as a new chevy truck. then they did the escalade with the stock hood b/d on 26s but not sure if the escalade hood sits any higher than a chevy/gmc hood or not.