nitrogen?

so ive got nitrogen right now, with the bottle going to a 5 or maybe 6 gallon tank then to the valves. is there any way to bypass using the tank? or could I down size the tank size? maybe to 2 or 3 gallons? also do i need a check valve going form the nitrogen to the tank to prevent air leaking out of the regulator after the tank is closed?thanks in advance

RUN YOUR NITROGEN STRAIGHT TO THE VALVES THATS HOW I DO IT !!!!

You should have a check valve in between the nitrogen and reg tank,yes.

I run my nitrogen bottle without a tank or check valve. I like the setup ok. I think I would rather have a tank inline. I believe the suspension would be a little faster to lift.

usually regulators have a check valve in them, i would only run one from the compressor to the tank only so you don't have 400 psi going to the compressor, if you have a tank the suspension will be faster than if you don't :fon: