Not getting enough lift

no, a re6 will be able to max you out, but will take a lot more pressure.

a re6 takes around 130-140 psi to max out an s10's front.. my re7 takes about 70-80psi the advantage of a bigger bag is more lift for less psi and thus, it rides better.

if you want that, then yes.. if you just want it bagged, then keep the re6's.

so then you are saying it would be better to run a bigger bag but you dont have to .unless hes running a compressor that only goes to 150 psi then he will really have a hard time getting off the ground. nitrogen or helium is a different story.

Originally posted by kingpin



so then you are saying it would be better to run a bigger bag but you dont have to .unless hes running a compressor that only goes to 150 psi then he will really have a hard time getting off the ground. nitrogen or helium is a different story.

pretty much. I install re7's 99.9% of the time, on everything. Some ppl want re6's up front and hell some want them in the back.

If you want the best setup possible, then go with re7's with some shocks and play around with a few things till it lays out and gets enough lift.

if you're using a shop compressor then getting full lift with a shredder valve on re6's will not be easy.. so its hard to say what is going on.

makes sense.