Helpful Air Zenith install tips

i wouldnt suggest running 8Ga. even with just 1.
i just upgraded to 4Ga. and it seemed to be much better.

Call air zenith for a new check valve man, thats how i got mine. Free

Zenith USA
Address: 4185-A West Post Road
City: Las Vegas, NV 89118
Tel: (702) 270-7988
Fax: (702) 270-7733
E-mail: info@air-zenith.com

THANKS RICK

be on the lookout for proper installation in an upcoming issue of MT It should actually be in the next issue out in a week or two

called air zenith and they have me a check valve on the way....real nice guys

Originally posted by ChevyGurly



3)NO SMALLER THAN A 60-AMP SOLENOID/RELAY MUST BE USED

(A REGULAR 30-AMP BOSCHE STYLE RELAY WILL BURN UP!)

6)IF RUNNING 2 AIR ZENITHS RUN 2 CIRCUIT BREAKERS,2 80AMP SOLENOIDS ,MIN. 8 GAUGE POWER AND 1 PRESSURE SWITCH



That doesnt make any sense, are you sure you dont mean 2 60 amp solenoids but TWO runs of 8 ga wire? Because if 1 60a is okay for one AZ, why would you need 160a (2 80's) for two? Upgrading the wire to supply 120a (60x2) would seem to be the important part..

Originally posted by S10All422S



be on the lookout for proper installation in an upcoming issue of MT It should actually be in the next issue out in a week or two

got it yesterday, good right up

everyone is saying to run like 4 or 8Ga. But what size wire is coming out of the compressor?