devious one piece notch?

has anybody used the devious one piece notch? looks easier and less time consuming. i didnt see pricing on their website. what do they go for?

Edited: 5/14/2006 10:58:39 PM by slamdB

Who out there makes $40/hour, cause that's what you'll save. Meaning you'll cut about 2 hours off and gain about 80 bux.

Later

If i were gonna do my rear over id just buy the boxed tubing and have the steel place cut it to the angles i needed all for about 60bucks and then weld it up...just my 2 cents worth maybe 30mins more of work to save a pretty penny.

I just got through making mine.

^ already commented on those bein badass over on nissancustoms, but once again

but mike if possible, building some similar to robbies would save you alot of $ and still save time compared to 8pc.

gravity-werx also offers these:For about the same if not cheaper than most 8pc. sets.

Good luck either way, let us know how it goes.

slamdb i make 35 and hour is that close enough

A friend of mine used the devious ones on his hombre. He loved them. I would probably get the same if i needed them.

Originally posted by WhyNotFab



^ already commented on those bein badass over on nissancustoms, but once again

but mike if possible, building some similar to robbies would save you alot of $ and still save time compared to 8pc.

gravity-werx also offers these:For about the same if not cheaper than most 8pc. sets.

Good luck either way, let us know how it goes.

I think these look much cleaner, i dunno tho just my opinion. like i said earlier i would have the steel shop cut the tubing just like these and then weld um up way simpler and cleaner than 8piece and cheaper than the devious ones...

Edited: 5/15/2006 11:13:50 PM by M I Zombie

I made mine out of box tubing too. just found the angles, drew out a plan, and cut a pie out and bent them down and welded them up. tops look real smooth with no welds. Saved myself about 60 bucks too.