K
rear bag setup for IRS need opinions.
///RELAXED 720
+1y
4" total 2" per side but thats bcuz the irs i have is out of a turbo model (the axles are longer on the turbo than a non turbo)
Bigrick31
+1y
well i wont have the mazda rear end for a bit. so we wil have to make it for the stock rear end for now. lets make up a list of what well need so i can start ordering stuff.
Ill need parts for the cantilever
notch
box tubing
what else
Ill need parts for the cantilever
notch
box tubing
what else
///RELAXED 720
+1y
i wouldnt do it until u had the irs unless u just want to do it over
Bigrick31
+1y
i have been thinking of designs for bag mounts and such now i gotta think of something for the cantilever. I know i want it to look somewhat complex weather or not it really is. i odnt like straight normal pieces. its definatly gotta be different.
Bigrick31
+1y
Originally posted by draggin720
i wouldnt do it until u had the irs unless u just want to do it over
well we are re doing the whole back frame the truck is already bagged. did you need a cusom drive shaft or anything along with the rear end? how much did the rear end cost you? if you dont mind me asking maybe ill have enough to get one before summer vacation.
i wouldnt do it until u had the irs unless u just want to do it over
well we are re doing the whole back frame the truck is already bagged. did you need a cusom drive shaft or anything along with the rear end? how much did the rear end cost you? if you dont mind me asking maybe ill have enough to get one before summer vacation.
///RELAXED 720
+1y
Originally posted by Bigrick31
Originally posted by draggin720
i wouldnt do it until u had the irs unless u just want to do it over
well we are re doing the whole back frame the truck is already bagged. did you need a cusom drive shaft or anything along with the rear end? how much did the rear end cost you? if you dont mind me asking maybe ill have enough to get one before summer vacation.
yeah i had to have a driveshaft shop make one to fit... i went to a single shaft instead of the 2 piece also ...... & i got the irs from a friend of mine he was kinda enuff to give to me for free(bcuz i was gonna run a 13b rotary engine).....but i wouldnt think the irs would be more than 250-300 from a junkyard
Originally posted by draggin720
i wouldnt do it until u had the irs unless u just want to do it over
well we are re doing the whole back frame the truck is already bagged. did you need a cusom drive shaft or anything along with the rear end? how much did the rear end cost you? if you dont mind me asking maybe ill have enough to get one before summer vacation.
yeah i had to have a driveshaft shop make one to fit... i went to a single shaft instead of the 2 piece also ...... & i got the irs from a friend of mine he was kinda enuff to give to me for free(bcuz i was gonna run a 13b rotary engine).....but i wouldnt think the irs would be more than 250-300 from a junkyard
Bigrick31
+1y
Originally posted by draggin720
Originally posted by Bigrick31
Originally posted by draggin720
i wouldnt do it until u had the irs unless u just want to do it over
well we are re doing the whole back frame the truck is already bagged. did you need a cusom drive shaft or anything along with the rear end? how much did the rear end cost you? if you dont mind me asking maybe ill have enough to get one before summer vacation.
yeah i had to have a driveshaft shop make one to fit... i went to a single shaft instead of the 2 piece also ...... & i got the irs from a friend of mine he was kinda enuff to give to me for free(bcuz i was gonna run a 13b rotary engine).....but i wouldnt think the irs would be more than 250-300 from a junkyard
yea thats about how much i was seein them go for
Originally posted by Bigrick31
Originally posted by draggin720
i wouldnt do it until u had the irs unless u just want to do it over
well we are re doing the whole back frame the truck is already bagged. did you need a cusom drive shaft or anything along with the rear end? how much did the rear end cost you? if you dont mind me asking maybe ill have enough to get one before summer vacation.
yeah i had to have a driveshaft shop make one to fit... i went to a single shaft instead of the 2 piece also ...... & i got the irs from a friend of mine he was kinda enuff to give to me for free(bcuz i was gonna run a 13b rotary engine).....but i wouldnt think the irs would be more than 250-300 from a junkyard
yea thats about how much i was seein them go for
TwistedMinis
+1y
Ricky, go look around at Pick-N-Pull to see if you can find one. The rearends are less than $200 there. And like $100 for a straight axle if you want to just go over to a Yota axle for now. I don't see the point in backhalfing it with the Nissan rearend. But give me a calll and we'll figure it out for sure.
granth
+1y
whats up rick, its saywhat? from ca.com.
look into possibly using a lincoln LS rear end. (its IRS as well)
look into possibly using a lincoln LS rear end. (its IRS as well)
Bigrick31
+1y
Originally posted by framedragger
whats up rick, its saywhat? from ca.com.
look into possibly using a lincoln LS rear end. (its IRS as well)
hey whats up i didnt know you were on here. Ive had an account on here for a while but never used it because i always went to nissanminis.com but now that its down i started posting here. ill have to check the prices on the lincoln rear as well thanks!
whats up rick, its saywhat? from ca.com.
look into possibly using a lincoln LS rear end. (its IRS as well)
hey whats up i didnt know you were on here. Ive had an account on here for a while but never used it because i always went to nissanminis.com but now that its down i started posting here. ill have to check the prices on the lincoln rear as well thanks!