adjustable titanium drag blocks

^ ^ that could be an option. i was thinking too, you could make them with some sort of locking pin instead of the bolt.....because this set-up reminds me of jack stand, heh. it'd be nice to just pop a pin out and lower them down. these drag bars are a pretty kick ass idea by the way.

I don't know if you would make a whole lot of money because they cost of titanium is high and you would have to sell those generally cheap because of how small they are. Those things would last 10 seconds then you would have to wait for it to cool off, then lower it another notch, and that shit takes some time to cool off.

I might want a set... what diameter rod is in them?

yea hot titanium is REALLY not gona hurt your paint

ILL DRAG BLOCKS.OR BODY I DONT CARE HAVE TO PUT A PAN B/C I WAS DRAGGIN MY BLOCKS I GUESS I AM SEMI WEAK B/C I DRAG BOTH.BUT WHEN U HAVE TO BUY NEW SHEETMETAL ALL THE TIME U RECONSIDER DRAGGIN BODY ALL THE TIME.YEAH BRO ILL BUY A PAIR

pm me. ill take a set for 80.

Originally posted by jmn444



I might want a set... what diameter rod is in them?

1" titanium round stock, 6" long, and the five adjustment holes are one inch apart

i have used half of a leaf spring so you have it kind of on a spring so when you lay out at a show it just tucks up above the frame and when you lift it comes back down it worked damn good

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4637949958

here ya go, starting bid is $20 these are a little different than the first ones.