K
BIG PROBLEM WITH KUSTOMSWERK ARMS
time1
+1y
The balljoints will go in both ways if you unscrew them all the way but you gotta remember which way they went in and put them back the same way you took them out. I would almost bet that is your problem.
impulse
+1y
Originally posted by TiMe_1
The balljoints will go in both ways if you unscrew them all the way but you gotta remember which way they went in and put them back the same way you took them out. I would almost bet that is your problem.
Im kinda confused with what your sayin.
The balljoints will go in both ways if you unscrew them all the way but you gotta remember which way they went in and put them back the same way you took them out. I would almost bet that is your problem.
Im kinda confused with what your sayin.
TwistedMinis
+1y
Originally posted by jmn444
damn... i still just see an X.
I see both pictures. I think it's just your computer.
damn... i still just see an X.
I see both pictures. I think it's just your computer.
time1
+1y
Originally posted by iLLairgasm
Originally posted by TiMe_1
The balljoints will go in both ways if you unscrew them all the way but you gotta remember which way they went in and put them back the same way you took them out. I would almost bet that is your problem.
Im kinda confused with what your sayin.
ok...try this, take your upper arms off and take the balljoints and unscrew them and take them out. FLIP the arms over and screw the balljoints back in and put them arms back on.
it may look like the balljoint sleeve doesnt have an angle on it but i bet it does.
make more sense?
Originally posted by TiMe_1
The balljoints will go in both ways if you unscrew them all the way but you gotta remember which way they went in and put them back the same way you took them out. I would almost bet that is your problem.
Im kinda confused with what your sayin.
ok...try this, take your upper arms off and take the balljoints and unscrew them and take them out. FLIP the arms over and screw the balljoints back in and put them arms back on.
it may look like the balljoint sleeve doesnt have an angle on it but i bet it does.
make more sense?
Low_SST
+1y
a couple of degrees could be the difference.
time1
+1y
^WERD
impulse
+1y
Originally posted by TiMe_1
Originally posted by iLLairgasm
Originally posted by TiMe_1
The balljoints will go in both ways if you unscrew them all the way but you gotta remember which way they went in and put them back the same way you took them out. I would almost bet that is your problem.
Im kinda confused with what your sayin.
ok...try this, take your upper arms off and take the balljoints and unscrew them and take them out. FLIP the arms over and screw the balljoints back in and put them arms back on.
it may look like the balljoint sleeve doesnt have an angle on it but i bet it does.
make more sense?
yup makes sense... i'll try that as well.
Originally posted by iLLairgasm
Originally posted by TiMe_1
The balljoints will go in both ways if you unscrew them all the way but you gotta remember which way they went in and put them back the same way you took them out. I would almost bet that is your problem.
Im kinda confused with what your sayin.
ok...try this, take your upper arms off and take the balljoints and unscrew them and take them out. FLIP the arms over and screw the balljoints back in and put them arms back on.
it may look like the balljoint sleeve doesnt have an angle on it but i bet it does.
make more sense?
yup makes sense... i'll try that as well.
tenagator
+1y
thsoe webshots pics may not show up webshotsmus tdo soemthing so u cant paste a pic somewhere. eric never told me to flip the arms when i look at them i do not see any angle difference at all on mine. there straight on to the balljoint unless the angle is so minimal u cannot see it??????
tenagator
+1y
all this complaining is nto gona get us anywhere. if it hasnt yet it never will. jus give up guys. what can we do ya know?
KEG Media
+1y
Mike are your arms for your dime or another type of truck? i have arms for my dime being made right now from KW. just curious.