00-05 burban suspension

is the burban suspension the same as a fullsize truck of the same years... just curious about spindles and such...

should be. they are basically the same chassis, just different body

Originally posted by JUICEDIME00



should be. they are basically the same chassis, just different body

i figured so but i know blazers and s10s run different spindles so i was seeing if there are small differences like that... anyone else?

well i found out the front is a torsionbar setup...

The rear is a trailing arm setup with coils I believe

i BELIEVE THE SUBURANS ARE TORSION BAR, WHERE THE PICK UP IS A COIL SPRING.

different

Originally posted by kboring



The rear is a trailing arm setup with coils I believe

yea your correct on that.. any good pics of any layed out besides the grey one in truckin?

Front is Torsion Bar style, I believe the upper control arm mounts are lower than a regular Silverado. Rear is basically a parallel 4 link with panhard. I had to swap a frame out on an 02 Sub when I worked at the bodyshop.

Originally posted by FabWerx



Front is Torsion Bar style, I believe the upper control arm mounts are lower than a regular Silverado. Rear is basically a parallel 4 link with panhard. I had to swap a frame out on an 02 Sub when I worked at the bodyshop.

think it would be much of an advantage to swap a clip for a fullsize truck... just to get rid of torsions and all.. basically want very little camber don low with very good lift..