where are u guys gettin ur bar ends 4 ur 4-links? i know sd has them thats what i used 4 my 1st 4 link but those things are massive and im lookin 2 go a little smaller. thanks 4 any help u can give.
make em.
1.5 or 1.75" .25 wall tubing, and throw some busings in them and their good to go.
I think SD is now selling them in smaller sizes also, may wanna look into that.
Taylor
ok taylor made sense of it.
the same that u used for the links or 1.5 x .120 wall tubing. most bushings are made for .120 wall tubing
ART sells a few smaller sizes, had to buy some of their bushings when Mike from gravity-werx hooked my brother up with a new 4link bar. If they sell the bushings, they must sell the ends.. ridetech.com
Check with Mike too, pretty sure he's going with larger tube now for his links.. but maybe he has extra ends left over.
gravity-werx.com
ive been killin mike on his smaller 1 3/4 ends, but i think he still has some.....
1&3/4" DOM with a 1/4" wall works great and Energy Suspension #9002 graphite impregnated poly bushings fit inside nicely.
(thats Energy Suspensions 4 link bushing)