Would you consider this a BD?

1568 views
57 replies
32 following
K
Would you consider this a BD?
NIGHTMARE73 avatar
NIGHTMARE73
+1y
check this tech sheet out ,, its from a gm forume , it shows the frame rails, and tells how they are part of a unibody
http://www.rv.net/forum/index.cfm/fuseaction/thread/tid/16489071/gotomsg/16500521.cfm
WDMASTR avatar
WDMASTR
+1y
what an idiot. i want an astro van with a full frame front to rear from the factory. i would be the only person in the world (besides layinDUNTZ) to have one. then we could hang out all day and talk shit on street source about our full framed vans. go bother other people. i can only hope that you aren't serious and just trying to get a rise out of people..
deflatd avatar
deflatd
+1y
Originally posted by 2lowastro



then i guess they should take this guys award away for 3rd body dropped truck



Http://www.streetsourcemag.com/Profile.aspx?profileid=21535

it's actually sfbd'd
bagged92 avatar
bagged92
+1y
Edited: 1/1/2006 9:18:29 PM by bagged92

I might as well add this

This is from another site:My 2000 Safari has a stub frame from under the front passenger seatsforward and a uni-body from there on back. A friend told me this beforeI bought it. I had the dealer put it on the lift so I could check itout. It does have a 6,000 Lb. tow rating according to the literature.
chunky_thunder avatar
chunky_thunder
+1y
Originally posted by bagged92



Edited: 1/1/2006 9:18:29 PM by bagged92

I might as well add this

This is from another site:My 2000 Safari has a stub frame from under the front passenger seatsforward and a uni-body from there on back. A friend told me this beforeI bought it. I had the dealer put it on the lift so I could check itout. It does have a 6,000 Lb. tow rating according to the literature. i found that one as well when i did my search
stromad avatar
stromad
+1y
jeff (4uh8rs) thanks i didn't even know that pic was on our site you are the man maybe this guy will Shut up now...
4uh8rs avatar
4uh8rs
+1y
HE WONT.BUT NO PROB MAN.I HAVE DONE 2 B4.I DIDNT PULL THE SUBFRAME OUT I JUST HUNG THE ENGINE ON A CHERRY PICKER AND Z THE SUB FRAME WHILE IT WAS STILL ATTACHED TO THE BODY
stromad avatar
stromad
+1y
Originally posted by 4uh8rs



HE WONT.BUT NO PROB MAN.I HAVE DONE 2 B4.I DIDNT PULL THE SUBFRAME OUT I JUST HUNG THE ENGINE ON A CHERRY PICKER AND Z THE SUB FRAME WHILE IT WAS STILL ATTACHED TO THE BODY

NIce

were gonna build a jig just to be sure its accurate...
stromad avatar
stromad
+1y
a post from anpther site from the guy I was having the dissagreement with when i showed himj this thread....


how i see it on that site, is you have two types of people that are posting on that forum, you're idoits that know nothing, and the ones that are saying the correct answer. it is not concidered a body drop. it has no frame, and you never cut your floor to raise it. therefor you cannot concider it a body drop just because you z'd the frame. like i posted in the other thread. that c-10 at the shop, was z'd. that's not a body drop. that is a z'd fucking frame. that's it.
4uh8rs avatar
4uh8rs
+1y
SO SINCE I BUILT A FRAME FOR MY BLAZER AND DIDNT CUT THE FLOOR ITS NOT BODY DROPPED I GUESS