K
73-87 chevy c-10 on 24's ?
lowc10
+1y
There is also alot of cutting out to do on the fender. Relocate the hood hinges too
hammered
+1y
I'm actually building one as a shop project for SEMA 06. The frame is one the frame table as we speak. It will be bodydropped on 22s and 24s. Keep checking our website for updates. www.killerridez.com
lowc10
+1y
How does that crossmember work out. The bottom stays the same and the frame mounts are the same in the pic. So how does that help?
Bagged87Chevy
+1y
Theres not enough room on these trucks for 24s. 22s with a 35 series tire are right on the hood if you have the body laying. You would have to modify the hood or something like that blazer to make it work.
Low_SST
+1y
^^they make a 255/25/24 now so its not a problem
TwistedMinis
+1y
Originally posted by lowc10
How does that crossmember work out. The bottom stays the same and the frame mounts are the same in the pic. So how does that help?
No, it moves the bottom up. My friend is in the middle of doing this right now. The two side mounts raise above the frame, and you have to make a new mount for them, but thats it. The main mount is the two holes on the top of the crossmember, right were the sectioning ends.
How does that crossmember work out. The bottom stays the same and the frame mounts are the same in the pic. So how does that help?
No, it moves the bottom up. My friend is in the middle of doing this right now. The two side mounts raise above the frame, and you have to make a new mount for them, but thats it. The main mount is the two holes on the top of the crossmember, right were the sectioning ends.
lowc10
+1y
the 3 holes on the sides im guessing. You will have to get some pics of it on the frame it looks simple enough