Bags

404 views
22 replies
11 following
K
Bags
FreelandKustomz avatar
FreelandKustomz
+1y
if your axle is hittin the notch. thats not the bags problem. thats the notch. you have no choice but to do it over again. or get smaller rims. thats it. period
eks10BDRG-N avatar
eks10BDRG-N
+1y
just a suggestion>>>if its the bags over the axle the problem you may have to cut the cross bars and weld them to the top of the notch and have everything move up. the new bars can be bent down on the ends and welded up again. just giving you some ideas bro.
layin93 avatar
layin93
+1y
yah bag over the axle wont alow my truck to lay out it is bout 3/4 to a inch away
FreelandKustomz avatar
FreelandKustomz
+1y
yeah i just looked at the pics of your truck. if the axle is touching the c notch. do it all over again, or smaller rims. if the axle is not touching. tha hack those iron cross mounts off, get new ones and do spacing between the brdge and the mount. or i say ditch the whole above axle crap and link that bitch!
FreelandKustomz avatar
FreelandKustomz
+1y
also you could try to salvage those brackets if you know how. but seriously best thing to do is move them onto your links if you have them.
layin93 avatar
layin93
+1y
it is linked but it is parallel 4 link and i was just trying to make it a little easier and i didn't know if there was any bags that were that small, Kinda sucks moving every thing up though cause then i loose more lift
olskoolpup avatar
olskoolpup
+1y
are you running suicidedoors.com lower axle brackets?
if so, they set the bag kinda high off of the axle. you could section that. should be able to gain the amount you need.
FreelandKustomz avatar
FreelandKustomz
+1y
yeah he has a point. you can secion it out. and weld it back up. that would help alot. and i know what you mean about loosing lift. you should of just done a wishbone 4 link. they are just as easy at that. or shit even a 2 link with a pan hard like you have would of worked great
layin93 avatar
layin93
+1y
yah that is what i was thinking too but i had it bagged for a year on 18's and then stepped it up to 22's and figured all the stuff was like new so i would try to use it again i guess i will end up taking the bottom bracket and trim it down.
jland1980 avatar
jland1980
+1y
if you dont want to redo your notch get the cantilever kit from kp components they make it with an adapter to fit whatever 4 link u got and it bolts on quick you get more lift and it rides a whole lot better. i had the same problem.