K
for all u smarter people than me watts?
1los10
+1y
ok i need to know how to fab up a watts link mainly the center piece that moves i've looked at the totally polished kit and realized its to exspensive so how do i make it i've asked this befor and nobody ever gives me a good answear
nathansmc
+1y
there are a few ways you could go about this.
NUMBER 1: if your truck is your daily, go get yourself anotherdiff casing, and modify it.peirce the casing just enough for your rod, weld inside and out. clean inside well!!! then add 4 braces, each going off perpendicular to eachother (1/4" thick, 1 1/4" tall) as a suggestion. then just make your brackets on your chassis
NUMBER 1: if your truck is your daily, go get yourself anotherdiff casing, and modify it.peirce the casing just enough for your rod, weld inside and out. clean inside well!!! then add 4 braces, each going off perpendicular to eachother (1/4" thick, 1 1/4" tall) as a suggestion. then just make your brackets on your chassis
Low_SST
+1y
just copy thier design and get busy with the cnc machine.
WebCzar
+1y
Street Rodder Mag had a "how to" set up a Watts. (see the cover of that issue here)
Very cool article. I think it is the one called: Being IndependentBuilding a chassis that looks and rides like "new" By D. Brian Smith
If you need it I can scan and post.
~~~ The Web Czar ~~~Belly Draggin 1949 Chevy sled
Very cool article. I think it is the one called: Being IndependentBuilding a chassis that looks and rides like "new" By D. Brian Smith
If you need it I can scan and post.
~~~ The Web Czar ~~~Belly Draggin 1949 Chevy sled