K
FAT LOW PRO RUBBER
sweeden
+1y
holy fuckin ginormous?!?!?!?!? think ull have some traction???
dssur
+1y
rudy gets a subsidy from the city to follow the asphalt machines and steamroll new roads.
MoneyMike2
+1y
you are my hero...
maddawg
+1y
Originally posted by Russ-D
rudy gets a subsidy from the city to follow the asphalt machines and steamroll new roads.
LMAO!! dammit russ you never cease to bring laughing tears to my eyes.lol
the rims are 13.5 with a 4" FRONT SPACING(backspacing is 9.5).
i did'nt wanta very deep dish because my front rims have no lip.
the picture above with my truck on the lift has different tires and wheels, those are 335/30/18's
rudy gets a subsidy from the city to follow the asphalt machines and steamroll new roads.
LMAO!! dammit russ you never cease to bring laughing tears to my eyes.lol
the rims are 13.5 with a 4" FRONT SPACING(backspacing is 9.5).
i did'nt wanta very deep dish because my front rims have no lip.
the picture above with my truck on the lift has different tires and wheels, those are 335/30/18's
kleerance
+1y
I saw the new Nitto 345/25/20 at SEMA this year...I think it was like 26" wide? Just wish it would fit my 20x10!!
http://streetsourcemag.com/IM/viewusercontent.aspx?IMStyle=2&ID=kleerance
http://streetsourcemag.com/IM/viewusercontent.aspx?IMStyle=2&ID=kleerance
baggedK
+1y
Rudy, the advertised 13.5" wheel (unless it's a 12.5" wheel bead-to-bead) would be measured as such: 14.5" edge to edge with 9.5" backspace and 1.75" center forging would yeild a 3.25" lip. This is standard 2piece billet formula unless the rear pads are shaved.
The 345/25/20 tire specs are 13.58" wide, 26.79" tall, 3.39" sidewall, and are reccommended to be mounted on a 12" to 13" wheel.
Those P-Zero Rosso's are nice.
The 345/25/20 tire specs are 13.58" wide, 26.79" tall, 3.39" sidewall, and are reccommended to be mounted on a 12" to 13" wheel.
Those P-Zero Rosso's are nice.
mtm
+1y
looks good bro, pirelli p-zeros i presume?
maddawg
+1y
Originally posted by baggedK
Rudy, the advertised 13.5" wheel (unless it's a 12.5" wheel bead-to-bead) would be measured as such: 14.5" edge to edge with 9.5" backspace and 1.75" center forging would yeild a 3.25" lip. This is standard 2piece billet formula unless the rear pads are shaved.
The 345/25/20 tire specs are 13.58" wide, 26.79" tall, 3.39" sidewall, and are reccommended to be mounted on a 12" to 13" wheel.
Those P-Zero Rosso's are nice.
sorry for the misinformation.i just got off work when i answered my last post and was pretty out of it.
here ya go.12.5 bead to bead (13.5 overall)
9.5" backspacing, or 4" frontspacing(which does yeild a little bitty 3.25" lip).
the recommended widths for the tire are 11-13.5.
"KLEERANCE" the tires are 26.8" tall...not wide, and 13.6" wide.
Rudy, the advertised 13.5" wheel (unless it's a 12.5" wheel bead-to-bead) would be measured as such: 14.5" edge to edge with 9.5" backspace and 1.75" center forging would yeild a 3.25" lip. This is standard 2piece billet formula unless the rear pads are shaved.
The 345/25/20 tire specs are 13.58" wide, 26.79" tall, 3.39" sidewall, and are reccommended to be mounted on a 12" to 13" wheel.
Those P-Zero Rosso's are nice.
sorry for the misinformation.i just got off work when i answered my last post and was pretty out of it.
here ya go.12.5 bead to bead (13.5 overall)
9.5" backspacing, or 4" frontspacing(which does yeild a little bitty 3.25" lip).
the recommended widths for the tire are 11-13.5.
"KLEERANCE" the tires are 26.8" tall...not wide, and 13.6" wide.
kleerance
+1y
That's what I meant...thanks for the correction. I've got a picture of the Nitto if anyone wants to post if for me. Tread pattern looks pretty killer.
maddawg
+1y
where the link i'll post it (and probably regret getting the perelli's).
i got the perelli's because they were the only one's i could find who made this demention.
i got the perelli's because they were the only one's i could find who made this demention.