help quick please

I got a prob, my back left bag will fill partially, but its not filling all the way, any ideas?

the valves i have are 1/2" E valves

possible a kinked air line...

Shock stuck...

Link in a bind...

i checked all of that, but its not anything like that, its got me stumped

Are you hitting one switch that controls both rear bags on seperate fill valves? If so.. will the left one eventually fill if you hold the switch longer than just allowing the right bag to fill, or by using that bag's individual switch (if you have it setup that way)?

If that's the case the valve sounds like it might be sticking, or have something caught in it. Could be a little rust or a piece of teflon tape or something. Hope you can figure it out, but that's what I'd check. Good luck man

i heard some stories about the e valves having trash in them. so i pulled all of mine apart and filed off all the burrs and cleaned out the orifices() so shouldnt have any problems. i dont have them installed yet but while apart i did notice a lot of burrs and some metal shavings in them. hope it helps.

yeah recently my rear dump has just randomly started to quit on me i checked all the connections i gotta hit my switch like 5 times before it'll drop my truck stupid ass ~e~ air valves