What valves?

I've got some of the best prices you'll find on Parker valves, get in touch with me and we'll get you setup. and i'll do what I can to help with shipping as well, email me an I'll get you detailed specs and everything like that.
info@centerstagecustoms.com
plenty stocked, just hit me up and we'll get you setup
later
Jimmy - Center Stage Customs

3/8 SMC's

Specs for 1/2" parkers break down like this.Manufacturer rates them at 300 psi (i consider that like a audio RMS rating )put out 4.0CV.5 Amperage1/2in port 5/8in inner orfice

I've been using these for years and by far the best valve i've ever seen or used (of coarse everyone has different experiences but im just lettin ya know mine)

and SMC's are are 3/8" port, 10mm orficeput out 2.4 CVvery safe bet for a little reliable valve.

Let me know though and I'll get you guys hooked up with whatever your needinglater fella'sJimmy - Center Stage Customs

i heard that the DANZ valves are bada** and heard alot of about ASCO

i love my slam specialty valves. I use them for dumps and have my gc 450's for fills its a real good set it goes down slow and fast GOTTA LOVE IT

If you want the job done right the first time then get Parkers. If you want cheaper and lower quality and for the valves to mess up sometimes and where everytime your valve messes up you have to send it back ot get it warrentied then go with GC's or SMC's. But hey you get what you pay for

Originally posted by 1sikdakota



Specs for 1/2" parkers break down like this.Manufacturer rates them at 300 psi (i consider that like a audio RMS rating )put out 4.0CV.5 Amperage1/2in port 5/8in inner orfice



And you are a liar. I can say that because I bought 2 valves from you and you said " 1/2' 5/8" orifice at 300 psi." Well that is all but wrong. The ones with the 5/8" orifice are rated at 150 psi. The ones that are rated at 300 psi are 7/16 orifice. Just like the sticker says on the Parker valves YOU sold me. You shouldn't lie to people just to get a sale. That is pretty pethetic, and I'll never buy from you again.

Ouch guess i just got blasted

alright lets bring you up to speed on Parker

The original stickers showed em 1/2" port w/ 5/8" orfice but only showed 150 psi max rating.Welp they actually always have been 300 but when they decided to change that there was a printing error on the sticker which showed it at 300psi now but with a 7/16" orfice but it actually is a 5/8", if you know what your doing pull it apart and measure and you'll see I didnt lie to you in the least bit, you got exactley what you ordered, and im sorry your not knowing has caused you to decide you dont wanna order from us anymore but what can i say?

but next time before you go tryin to put me on blast like i screwed you over why dont you try callin or something and take it up with me and i could of explained this too you.

Ask anyone who deals alot of Parker valves and they can verify that !

I lied to NOBODY though to make a sale. come on man, am i really gonna lie to you to sell you 2 valves?

And you are a liar. I can say that because I bought 2 valves from you and you said " 1/2' 5/8" orifice at 300 psi." Well that is all but wrong. The ones with the 5/8" orifice are rated at 150 psi. The ones that are rated at 300 psi are 7/16 orifice. Just like the sticker says on the Parker valves YOU sold me. You shouldn't lie to people just to get a sale. That is pretty pethetic, and I'll never buy from you again.

Wow man tahts a pretty harsh statement. Might want to check your facts though.. open that valve up take some calipers and measure the ID of the opening. You'll see approx .625 (or 5/8").. Fact is the valve is identical to the old ones.. nothing in the valve has been changed not even the manufacturing process. The valve is 100% identical to the old version. All they did was rerate the valves to 300psi from 150psi. In doing this there was a misprint on the lable showing the orifice size as 7/16. So yes Jimmy is right the lables are a misprint the valve is actually 1/2x5/8. I don't even think you can buy the valve in 150psi anymore unless it's old stock as all they did was change the stickers.

Well i did what kartracer said and I measured. I got 5/8". I apologize Jimmy for bashing you like that without knowing what I was talking about.