Colorado/Canyon

There are no bag cups for the colorado cause in uses a strut front suspension,and not a seperate shock and coil like an S-10.I used the DJM lower arms,stock upper arms piecut about 15 degrees with a 3/8" balljoint spacer on the upper.I sent Jason at suicidedoors.com a template and had him laser cut the balljoint spacer for me.Also I had the raise the steering rack up an inch to keep the tierods for binding.Plus had to notch the framerail for the tierods to clear.We did a tubular upper structure for the upper shockwave mount,and just used so tabs for the lower mounts.It took me a good 2 days worth of work to get it done,but it works great.It's on the green and white colorado under Scrapin the Coast coverage on this site.

that's the truck.

hey Michael,How much is your kit going to be going for?And do you have to relocate the steering rack and pinion and anything up front?CleanCut has got the cross member,right?

hmmm

depends on what all you are looking for. the upper and lower arms with new poly bushings will be 375 plus shipping. the rear we are not sure about.

what would the whole front kit run(arms,bag brackets,etc)??I can manage the rear.