Is it reliable

alright man thanks alot

okay here are some pic from the side and up top...you'll see part of the old tabs that the leaf springs mounted too. those have been cut off and new tabs were made for the bars up a little further on the frame so they didnt drag on the ground. where the bar mounts to the axle i used hyme joints so i could hit sides but their not necessary. if you dont use em you'll only have front back.





here is where that lower bar connects to the axle with the hyme joint. the other side is exactly the same way.




hope that helped...

ya man that helps alot did u have to customize that the three link or can u purchase it some where

THAT ONE WAS HAND BUILT, I THINK SUICIDE DOORS OR THORNBUCKLE (SP) ONE OF THOSE GUYS MAKES ONE FOR AN S-10 BUT ITS PART OF A BOLT ON KIT. YOU'LL PROLLY HAVE TO MAKE ONE OR GET ONE MADE.

Suicide Doors wants $249.99 for an upper wishbone similar to that. I asked them about it before I made mine.

Yeah, abit pricey, but not everyone around had that kind of fab skill, if you're not sure you can make something like that, or if your welder isnt big enough, makin some crap and ridin it could kill ya. We've made a few link bars, turned out good, but if you're not sure, dont risk it...

ya i was plannin on doin it mysels but a different design and hey do ya think i have to cut up my bed as bad as those pics cuz i wanted to place a tub over the bak wheel well o make it look clean but that cut looks huge k guys let me knoe

it depends...you can get creative with it and try to leave of modify most of the bed the way you want it...if you use a set up similar to that one, you could box it in how ever you want. the reason for the big hole is because that trailing arm on top moves up and down so the bed cant be anywhere around it on the same plane or it will hit...what you could do is lift your bed up enough to clear the arm then do a tub like you want over the bridge and wheel wells....the only thing is your bed will be a little shallower.

ya thats tru im gona see wat i can do bout sey up looks like s good idea

hey if anyone has any pics on rear bags hit me up please