Hey my pics are up in my profile..22s with ac

594 views
33 replies
28 following
K
Hey my pics are up in my profile..22s with ac
lowkey avatar
lowkey
+1y
Hey for who cares to see a s-10(setup for 22s but currently has 20s)laying out and still have working a/c,check out my profile...I am open for comments but I will say this...It was a lot of work and research to make it work but IT DOES WORK!!
doordraggintaco avatar
doordraggintaco
+1y
SHANNON IS ONE OF MY PERSONAL FREINDS AND HE IS ONE OF THE MOST HONEST PEOPLE I KNOW.IF HE SAYS HE DONE SOMETHING THEN HE AINT BULLSHITTIN!!!HE TOOK PRIDE IN BUILDING AN EXTREMELY CLEAN AND FUNCTIONAL TRUCK AND ALL EVERYONE CAN DO IS BITCH.MOST PEOPLE INCLUDING MYSELF JUST JERK THE A/C SHIT OUT AND THROW IT IN THE NEAREST TRASH CAN,BUT HE DIDNT,HE TOOK THE TIME TO RECONSTRUCT THE SYSTEM AND IF HE DOSENT WANNA TELL HIS SECRET ,THEN OH WELL.THERE IS ALOT OF MYSTERIES IN THE GAME OF CUSTOMIZING THATS NOT TOLD.
Scrapin S15 avatar
Scrapin S15
+1y
Originally posted by doordraggintaco



SHANNON IS ONE OF MY PERSONAL FREINDS AND HE IS ONE OF THE MOST HONEST PEOPLE I KNOW.IF HE SAYS HE DONE SOMETHING THEN HE AINT BULLSHITTIN!!!HE TOOK PRIDE IN BUILDING AN EXTREMELY CLEAN AND FUNCTIONAL TRUCK AND ALL EVERYONE CAN DO IS BITCH.MOST PEOPLE INCLUDING MYSELF JUST JERK THE A/C SHIT OUT AND THROW IT IN THE NEAREST TRASH CAN,BUT HE DIDNT,HE TOOK THE TIME TO RECONSTRUCT THE SYSTEM AND IF HE DOSENT WANNA TELL HIS SECRET ,THEN OH WELL.THERE IS ALOT OF MYSTERIES IN THE GAME OF CUSTOMIZING THATS NOT TOLD.

that's fine if he doesn't want to tell, but why the hell start a thread about his truck that "can" lay on 22's with AC and not backup his shit?
DLYDRGGR avatar
DLYDRGGR
+1y
Originally posted by Scrapin S15



Originally posted by doordraggintaco



SHANNON IS ONE OF MY PERSONAL FREINDS AND HE IS ONE OF THE MOST HONEST PEOPLE I KNOW.IF HE SAYS HE DONE SOMETHING THEN HE AINT BULLSHITTIN!!!HE TOOK PRIDE IN BUILDING AN EXTREMELY CLEAN AND FUNCTIONAL TRUCK AND ALL EVERYONE CAN DO IS BITCH.MOST PEOPLE INCLUDING MYSELF JUST JERK THE A/C SHIT OUT AND THROW IT IN THE NEAREST TRASH CAN,BUT HE DIDNT,HE TOOK THE TIME TO RECONSTRUCT THE SYSTEM AND IF HE DOSENT WANNA TELL HIS SECRET ,THEN OH WELL.THERE IS ALOT OF MYSTERIES IN THE GAME OF CUSTOMIZING THATS NOT TOLD.

that's fine if he doesn't want to tell, but why the hell start a thread about his truck that "can" lay on 22's with AC and not backup his shit?

i agree, dont start a thread bout somethin to keep people guessin just to tell them to call a shop to drop there truck off. if its not body dropped no one cares if it has ac or not anyway, if your gonna bodydrop it why didnt you move your clutch high enough? my roomates truck we had to move the clutch over and below the brake booster and move the cab back 3/4" just 2 clear 20's and roll layed out and theyre wasnt even hope for a factory ac evaporator b/c of the upper a-arm and tire, even with the cab moved back and a aftermarket blower in front of the evaporator or under the dash

judging by all the vehicles featured in MT the past couple issues that bullocks did im sure your system is setup right and functional and i remember that dark green s10 from a while back that was clean as hell (made me finally bd mine), but post some pics of your truck "layin on 22's with ac" before you star a thread bout it
eks10BDRG-N avatar
eks10BDRG-N
+1y
Edited: 11/14/2005 10:37:05 PM by eks10BDRG-N

Edited: 11/14/2005 10:36:15 PM by eks10BDRG-N

well i seen a s10 layin frame on 20s wit his a/c still in at turkey drag in tyler tx, the blower box was angled up alittle and the black box was cut down alot and redone what looked like sheet metal. I think he could still lay out on 22s(not bodydropped) cause there was still about a inch and some change left over until the tire hit the blower. So it is possable but like was said earlier shouldnt start a thread and not have anything to show for it besides some blurry pics.
flowdaddy avatar
flowdaddy
+1y
just my two cents - i was attending NADC when Jason was building this truck. He brought in the console and subbox. I remember that pretty good bc he didn't even do ALL of the work the students did some. So its kind of funny to see "lowkey" not being able to answer alot of these questions. There is no mysterious methods he is hiding from us. I 'm pretty sure the hands on stuff was left to Jason Bullock. I like the truck and it turned out good. Bullock's all over MT this month i know. but if you look back at alot of his work they are all the same setups the only difference is what color the truck is, rim preferance, and overall "theme". like i said - just my two cents... later
lowrthnu92 avatar
lowrthnu92
+1y
Originally posted by breakingstuff



This post is like getting a b-job from a virgin. Entertaining.., yes, but I could have been doing something better with my time.

same here , i cant beleave i read all 3 pages
lowkey avatar
lowkey
+1y
damn you guys still bitchin about this thread.It has been over a year since I started it.Drop it.
KEG Media avatar
KEG Media
+1y
damnit i just read all this and seen its a year old. so what was the outcome Shannon? does it lay on 22s with factory ac working?
jstbcuz avatar
jstbcuz
+1y
just to clear things up "flowdaddy" if i recall the console/speakerbox was brought into nadc where johnny watson did the airbrush work on it just like the M/T article says.he is a instructor not a student. so get your facts straight before you post up some bullsh*t