Nissan 720 Project (Finished)

24619 views
214 replies
35 following
K
Nissan 720 Project (Finished)
vegasyota94 avatar
vegasyota94
+1y
hey, with the bedrails like that, only supported on the top , does it like flap or woble when driving??
im wanting to cut the whole floor out of mine and do that, but wanted to know if it moves alot at the bottom when driving.
twisted minis avatar
twisted minis
+1y
There are braces that run from the top of the bed to the bottom just like stock. They are just a foot longer now.
vegasyota94 avatar
vegasyota94
+1y
do u have better pix?
i got all that rhino liner on my shit and i hate it... but u dont have any braces on the bottom going from left side to right side correct?
sorry if it sounds dumb, but i really dont know lol
twisted minis avatar
twisted minis
+1y
I just looked and I really didn't take pictures of them. It was just one of the last few things that got done before it left. But t doesn't go side to side. It just forms a triangle between the top of the bad and the bedside, if that makes sense. It just comes down to the bottom of the bed at an angle from the top and is welded in place.
vegasyota94 avatar
vegasyota94
+1y
makes sense.. thanks dude!