K
shaving mirrors
exploitedcustoms.com
+1y
what about some JB weld lol
bodydropped85
+1y
body filler is NOT more brittle than fiberglass im sorry. so ur saying when i fix a plastic bumper w/ some dolphin glaze it wont last?
baha
+1y
I guess our fiberglass turns out differently, I can bend mine further then I can dried up body filler. Do you use alot of Resin?
Man I looked up the Dolphin Glaze that sounds like some bad arse stuff.
DOLPHIN - Brushable very fine finishing stopper.
High adhesion to Galvanised, zinc coated steel, cured paint and most plastics.
HIGH VISCOSITY DOLPHIN GLAZE
Can Be Used On The Following Surfaces: Bare Steel, Galvanised & Other Zinc Coated Steels, Aluminium, GRP, SMC, Most Plastics & Previously Coated Surfaces.
I thought you were using regular fiberglass and bondo man my bad.
Man I looked up the Dolphin Glaze that sounds like some bad arse stuff.
DOLPHIN - Brushable very fine finishing stopper.
High adhesion to Galvanised, zinc coated steel, cured paint and most plastics.
HIGH VISCOSITY DOLPHIN GLAZE
Can Be Used On The Following Surfaces: Bare Steel, Galvanised & Other Zinc Coated Steels, Aluminium, GRP, SMC, Most Plastics & Previously Coated Surfaces.
I thought you were using regular fiberglass and bondo man my bad.
bodydropped85
+1y
ah its ok, were usin evercoat gold also u can get some stuff called filler honey from evercoat that will thin out the bondo and make it creamier than dolphin glaze. and once u add the gel coat to fiberglass its stiff as a board