K
Project junk yard dawg
mymmeryloss
+1y
Not too shabby.
lsumazdarider
+1y
Truck looks Realy good Ty
charlesskelter
+1y
I really want to see that color in person. Looks great!
lsumazdarider
+1y
Ty u can see it soon I'll be at a show in Winston Salem June 8 9 called friend n low places
SilentDawn
+1y
Just making a checklist of stuff you need to bring with you so you can drive this away from me.
*Driver's Seat Belt
*Front bumper turn signals
*Front corner lights
*Tail lights
*Instrument cluster
*Shift knob
*Windshield wiper arms
*License plate/registration
Also, this exhaust hangs below the frame rails. The first thing you should do when you get this back is take it to an exhaust shop and have proper exhaust made for it. I pieced together parts from my extended cab and none of it really fits. Its all tack welded enough to hold it, but easy enough to break it apart for removal.
I put the cat up as far as I could get it. But if the cat is hot and you air this out, the cat will be on the ground. The ground will catch fire. You're truck will be dead. Give a little time before you air it out over grass or leaves after driving.
*Driver's Seat Belt
*Front bumper turn signals
*Front corner lights
*Tail lights
*Instrument cluster
*Shift knob
*Windshield wiper arms
*License plate/registration
Also, this exhaust hangs below the frame rails. The first thing you should do when you get this back is take it to an exhaust shop and have proper exhaust made for it. I pieced together parts from my extended cab and none of it really fits. Its all tack welded enough to hold it, but easy enough to break it apart for removal.
I put the cat up as far as I could get it. But if the cat is hot and you air this out, the cat will be on the ground. The ground will catch fire. You're truck will be dead. Give a little time before you air it out over grass or leaves after driving.
lsumazdarider
+1y
Only thing not on my list was seat belt shift knob
SilentDawn
+1y
Took a few minutes today to finish up the last small things.
New rad cap; the old one wasn't holding any pressure
Wired up your running lights in your headlights
Shot a little video.
Video:
NOW can I work on my trucks now, please? Heheh!
Mine that (now) need engines/attention;
'87 B2000; previously with FE3 soon to have VW VR6 and Audi AWD trans and Merc. 5-link IRS and longbed and bags and VW electronics and...
'87 B2600 4X4; no engine
'90 B2600i 4X4; good running engine now, needs tidying up
4 Mazda's in my yard right now...Sometimes 2 others visit to make 6.
New rad cap; the old one wasn't holding any pressure
Wired up your running lights in your headlights
Shot a little video.
Video:
NOW can I work on my trucks now, please? Heheh!
Mine that (now) need engines/attention;
'87 B2000; previously with FE3 soon to have VW VR6 and Audi AWD trans and Merc. 5-link IRS and longbed and bags and VW electronics and...
'87 B2600 4X4; no engine
'90 B2600i 4X4; good running engine now, needs tidying up
4 Mazda's in my yard right now...Sometimes 2 others visit to make 6.
5bigb5
+1y
I don't think there's 6 Bs in my county haha