My Dirty Lil Bitch

i went on saturday afternoon for a min. not a lot of folks out there... seen the truck there looks good

The show grew alot by Sunday, we all had a blast. You shoulda stopped by and said hello.

Here's some shots from raising the upper control arms 1.5". I didnt take any before shots but most of you know what a stock UCA mount looks like.

cut a simple plate out of 3/16 and tacked it behind the stock UCA mount.

Zero camber with no shims.

This makes me wanna door my shit so bad now haha. But im wantin to daily mine so not sure if its the best idea to door it.












-Justin

So Have you fitted the engine back in it? Gonna be able to keep it under the factory hood without having to cut a hole in it?










-Justin

I'm working the issue as we speak. Should be able to get it in there without cutting the hood.

Well i am very interested in seeing if it can be done. That could change my bodyin plans lol










-Justin

That will look awesome with the stock hood. I'm hoping I can still run a stock hood on my body dropped Yota. I only lowered the engine 1.75" so I could still make room for the rack and pinion.

F*CK is that DIRTY
First time seeing this build

With just a standard bodydrop you should have no problems keepin the stock hood, There's alot of mods involved, like dropping your motor mounts and whatnot but nothing to difficult, just cutting and welding... I believe I measured my motor height at just under 24.5 inches and the hood where the motor would hit at 25.5 inches so it'll be wicked tight but should be no problem.