B2000 drift truck build

more handbrake stuff. Im not happy with the angle I welded it at so im going to cut it apart and re weld it.

Whats wrong with the angle you have it looks mint here love it bro. Think you could make a handle like that for me and ship it up.

Great progress, I love the hand brake idea too. Do you do any machining on the side? Like if I give you some specs can you get it made for me?

cut up and reworked. Not sure on where the shifter will be poking through but here is the proposed location for the handbrake.

Depends on what it is really.

Still cannot find a local 240sx driveshaft that I need to cut up. this is very frustrating as the cab could be back on the truck by now.

Have you tried any of the local junk yard, or craigslist? I'm up by your way sometimes in Rossville.

Ya I have tried and tried. Found one in rossville for 250$. Im not paying as much for a driveshaft as I did a full motor and tranny. Especially when I have to cut it up and only use the front ujoint and yoke.

The bad part is there are kids running around here with 240's all the time and I know one of them has to have one laying around.

Pull-a-part has a couple ga locations, they're also cheap and three local one always has a few 240s, it might be worth the drive.

man its gonna suck trying to find that driveline. especially since you are running a 1 piece driveline you need the s14 non abs driveline.

try zilvia.net its a forum for 240s and z cars BUT the FS section is HUGE and you should find one there. for around 150. maybe cheaper. im still lovingthe build man.