Engine bay wiring?

Ok i have tore apart all the wires under the hood. I got the pass side done, pretty easy keep the wiper wires and the rest goes. Now i have traced a few out but i would really like someone to let me know if im right or not and alittle help wiring the Main fuse block back in. This is how i setup the diff wires the first letter is if its a line down the wire then a / and thats the ring color of the wire if there is only 1 then ill put a x. So a black wire with white line and red circles would be Black W/R hope people can understand this

Coil Black W/X Yellow G/O (tach?)
Headlight Red B/B Red W/B
Right turn Green W/R
Left turn Green B/R
Running lights Red B/B
Oil press Yellow R/X
Alt Yellow B/X White B/O Black W/X
Horn Black R/X
Rev lights ?
Tack ?
Water temp ?


I am just chasing the wires i am not saying these are correct and wire you truck that way. This is what i have come up with so far anyone feel free to jump in and help. I am looking at were im gonna run wires and fuse blocks and left all the wires long for now but as i find were they go ill start to run then. Thanks, Craig

OK what are the 2 plugs on the trans for? I assume one is for rev light? 5 spd

BUMP!!!.....can anyone shed some light on this topic? im currently in the middle of an underhood clean up in my 90 b22 with weber carb... just when i bought my truck it was swapped from auto to 5spd and i have wires all spliced at the tranny too..... so anyone info on what wires are what would be great