K
pilot bearing
amgine_
+1y
i just took off my trans.. took off the pressure plate n springs n balls came down... replaced flywheel but since the pilot bearing already broke into pieces theres still that one top piece of the bearing stuck in there... i tried using the bearing remover for about 2 hours but looks like its not moving at all.. any advise on how to take it out
91b2200(cody)
+1y
well i replaced my clutch and stuff and mine didnt have a pilot bearing in it .. now it does
okay i hae done this before
and it was a lifted 91 toyota .. i used a dremmel
to cut it out .. i think ... any pics
okay i hae done this before
and it was a lifted 91 toyota .. i used a dremmel
to cut it out .. i think ... any pics
toddluck
+1y
try to thread a bolt int whats left the pull the bolt out
mazdatweaker
+1y
post deleted
Post was last edited on May 13, 2009 03:59. Edited 1
time.
method5150
+1y
good stuff. always remember the safety glasses!!