Baha's Mild Project Ranger-Updated 4 -27 - Shvd - Whls - Drp
12047 views
74 replies
14 following
K
Baha's Mild Project Ranger-Updated 4 -27 - Shvd - Whls - Drp
baha
+1y
Finally I reached the end of this phase. It's moving along pretty well for only be able to work on it for about 10hrs a week after work.
On to the pics!
Decided to go ahead and replace the ball joints and tie rod ends with Moog parts.
Stay away from duralast if you can. They are poor quality in my opinion. They may be lifetime warranty but do you really want to constantly replace ball joints? It's especially a pain on Rangers since you have to press them out and back in.
On to the pics!
Decided to go ahead and replace the ball joints and tie rod ends with Moog parts.
Stay away from duralast if you can. They are poor quality in my opinion. They may be lifetime warranty but do you really want to constantly replace ball joints? It's especially a pain on Rangers since you have to press them out and back in.
baha
+1y
I started sanding the runs and getting the rest of the body coated in guide coat.
Outside pics.
bratliff
+1y
That looks really clean Baha..
immortal1 (linn)
+1y
Looking good Rob. Have to agree with you on the Duralast crap. MOOG all the way - much better quality.
baha
+1y
Definitely Linn.
Well not to much has been done just some work on the AC System but I did take it to the track to get some stock times before doing any engine mods.
My best time was a 20.5, pretty sad I know.
Here is a video a friend and I did. He has a 2011 Mustang GT so naturally I got spanked.
" target="_blank
Getting ready to move so probably won't be able to work on it for a couple months.
Well not to much has been done just some work on the AC System but I did take it to the track to get some stock times before doing any engine mods.
My best time was a 20.5, pretty sad I know.
Here is a video a friend and I did. He has a 2011 Mustang GT so naturally I got spanked.
" target="_blank
Getting ready to move so probably won't be able to work on it for a couple months.