Doin a fullsize (Project F1 FIDY)...

Here is a video to check it out, I don't know how to measure it or anything. It's not much but it does move side to side a bit. I will be saving up for a watts link later. First I need to get the front bagged and get some other things done.

It's hard to tell in the video but it's all I can do. haha

nice lift man

Thanks man, I will have to get some better pics on a level surface.

Had to get new taillights due to draggin! You can't tail it but they are way different then stock. They are some kind of race style taillights. Didn't know exaclty what they looked like when I ordered them but they will work, I thought they were like stock with a different style lens but they are also built different. Here are some updated pics and it is on a level surface.

still running cali style a bit i see

haha, yeah gotta get a few more things for the front. mainly the shocks and I am trying to figure that out.

nice

Well, I got back on it. Here she is, I will be finishing the driver side tomorrow.

Stock...


Had to cut up the mounts I got from Ekstensive and build my own. I think I am just gonna start building my own mounts. So far I have had to modify every mount I have ever had, with the exception of the over axle upper mounts.











Now the top mount. All I had to do to the front was remove the coil overs and weld in the upper mounts (after shaping the upper mount to fit of course).

Here is the upper mount, I had to shape these to fit flush against the frame, I will get better pics of what I had to do when I do the driver side tomorrow.





Here it is installed with the dump valve mounted to the frame and plumbed. Just gotta wire up the valves.



Hittin sides ;D ...

Very nice looking install Ryan. Was kinda curious how things were going to work out for ya with the air bags. I have seen hydro cylinders installed on those trucks but not the air bags. Guess the next question has to do with shock mounts but I bet that is net to come.