Puttin the motor back in!
568 views
1 replies
2 following
K
Puttin the motor back in!
impulse
+1y
Ok so im puttin the motor back on the new frame, and i got new motor mounts, so im wondering how hig or low I should mount it above the cross member.
Im gussing it would be best to have it as low as possible.
Im only putting it in temporary to make my tranny x-member.
Im gussing it would be best to have it as low as possible.
Im only putting it in temporary to make my tranny x-member.
baggedb22
+1y
I'd say put it as low as possible my v8's oil pan bolt is only about 3/4 of an inch off the ground when layed out. Just be careful not to drag on shitty roads=)