engine driven HELP

i have the sanden like everyone else i cant get any air hose to stay on the bottom tube that pushes out the air. it pops off when i build the least bit of pressure. ive tried hose clamps any thing i can get made or any fiting i can buy. any hel pwould be nice thanks guys

Dont know if youve done this or not but tap the hole out to a 1/4" pipe thread and run a piece of hardline off the compressor. Then just get an adapter to go from 1/4 to whatever size airline your running.

amen, thats what we did on mine and it worked great. make sure you get a leader line because you will burn right through regular dot line in the engine bay.

was sitting at home brainstorming today and thats what i came up with. thanks a lot guys