New Member CLEAN 2600i Ideas?

1089 views
8 replies
7 following
K
New Member CLEAN 2600i Ideas?
seanzy1105 avatar
seanzy1105
+1y
Need some ideas on customizations, recently acquired a b2600i 4x4 have been replacing just about everything.

Future plans may include, 18's, lowering rear springs, , dark dark tint , new paint maybe two-tone, chrome yota bumper, possibly regasket motor from block upwards/ or explorer engine swap, I'm always looking for new ideas Let me know what you guys think!

thread post photo
mazdadropped avatar
mazdadropped
+1y
so many thing you can do , suicide doors , rag tops, sunroofs ,air ride suspension,hydros ,chop top , body drops
anything you want can be done , 4X4 or 2wd sheetmetal(fenders and bed)chrome window trim , mirriors,grilles,fender trim, big rims , i cant even think of half the stuff you could do , mazda b2200,b2000,b2600 all have many interchangable parts
mazdawg(mikey) avatar
mazdawg(mikey)
+1y
Here's an idea. Leave the truck alone and sell it to me. Please don't lower a 4x4. If you wanna do all that mess to a truck do it to a 2wd one that needs paint. Don't ruin that pristine example of fine mazda craftsmanship.
elbine69 avatar
elbine69
+1y
Welcome to the site. Im with mikey on this one. That thing is mint condition. Idk why you would lower a 4x4.
sierrax avatar
sierrax
+1y


DON'T LOWER IT! I have always wanted to see a 4X4 with a 5.0 F.I. and some nice 31's or 33's. I would also say don't do the Toyota front bumper, they never fit exactly right, they sag. Do a grant customs one if you want to change it and they work with the 4X4 fenders. Sliding rags are always a good mod, tonneau cover, paint, tint, chrome trim, interior. I could go on and on. JUST DON'T LOWER IT!
bgdb26k avatar
bgdb26k
+1y
nice looking truck bro! keep it stock and buy a 2wd to lower/bag
seanzy1105 avatar
seanzy1105
+1y
Love the ideas I will have to see if i can get my hands on a 5.0l power plant, add a leaf the rear, and some beefy tires to get very dirty
91extcab avatar
91extcab
+1y
if no one else had said it i was going to say it, dont lower it. it looks really good as it is. im with the crew raise it, motor swap, huge tires... dont ruin a really clean 4wd by trying to make it into what you can do with a $300 2wd like i did with mine. add the 4wd sheet metal to the 2wd drive, bag it, slam it, drag it, break it, fix it, do it all over again. talk to rufus if you want to know about the kit he bought to lift his.... hes got a clean truck.
elbine69 avatar
elbine69
+1y


Check out that thread for some inspiration.