K
building your own rod ends
huskerdually
+1y
What do you guys think of cutting off bolts or something similar and welding to tube to make your own rod ends?
Post was last edited on Aug 25, 2008 05:24. Edited 1
time.
jcampbell1180
+1y
I made cookies this weekend.
krewzlo
+1y
They aren't that expensive to buy, and would be more work than just buying them. I sell them in different widths, with or without studs on them and different size studs.
huskerdually
+1y
But you can't get the bigger studs in right and left hand thread.
krewzlo
+1y
that one is 1 1/8 comes in both lh and rh
4 link Stud & Bung w/poly
bushings RH, 1-1/8 & jamb nut
Those ones are not cheap though. PM me for price. but I also can get just the threaded studs for you with jam nuts and just the sleeves with bushings to build your own cheaper but can't get just the weld in tube bungs. If you are going to thread your tubing that way is about half the price
huskerdually
+1y
Ya I'm going to thread my tubing. pm being sent.