Street Source is shutting down April 30th, 2026. Read the announcement
D
Shot in the dark here...
lockone
+1y
I just got back from Nashville. I will go out and measure it after I put some wheels on this Lexus.
M
maz89
+1y
That's the usual.
Thanks Trev!
Hey Diabolic, did you ever happen to measure out that dime you had at the shop?
DK
diabolic kustoms
+1y
oh yeah i will get that this afternoon
M
maz89
+1y
Thanks man!
lockone
+1y
Tie rod mount to tie rod mount is 49".
Inside cradle to inside cradle is 24.5".
Let me know if you want any other measurements on the MII.
Inside cradle to inside cradle is 24.5".
Let me know if you want any other measurements on the MII.
M
maz89
+1y
Could you possibly get wheel mounting surface to wheel mounting surface and lower control arm bolt to bolt on the cradle?
lockone
+1y
You dont ask for alot do you?
lockone
+1y
Looking like 57" from front of rotor to the front of the other rotor.
13.5" from lower balljoint to the lower control arm mount on the cradle.
13.5" from lower balljoint to the lower control arm mount on the cradle.
DK
diabolic kustoms
+1y
ok for the s10 I got 52" from center of rotor to center of other rotor
M
maz89
+1y
Ok, thanks guys!!
Related Discussions in Dually Suspension
Thread
Posts
Last Post
Michigan Metal Works A-Arm group buy 88-98 Chevy/GMC 1500 to 3500 and dually's
S
last post by
Strokersace +1y
8
8
S
last post by
Strokersace +1y
