98 dodge ram offset

im sure this has been asked a 100 times but could not find it i got a bagged 98 dodge ram with the stock rear end i need to know the offset to get a 20 inch wheel to tuck any help will be very helpful thanx

how wide of a wheel?

its hard to get anythign to tuck on the back of those, but something around a +35 is a start for 9" wide or so.



Taylor

Edited: 1/26/2011 9:23:08 PM by CadillacMac

yeah i was thinking about a 8.5 or a 9 inch wide wheel a +35 i would prolly have to go with a billet wheel?

What about a +30?

Edited: 2/11/2011 12:25:37 AM by charger3G

i have a 96 and i did research for a couple of months 2 years ago and i am running 22x9 they have a +40mm offset. but i still had to cut the lip inside the wheel well on the rear end.

my wheels are boss 331 22x9 +40mm offset. i would not go any lower than a +40mm offset.

20x8.5 boyds with 5.25 backspacing, fenders sit on the edge of the tire. need at least 5.75 backspacing to get them to tuck with stock rear end