Michigan Metal Works ---- Updates : Please Read.
65587 views
1319 replies
232 following
K
Michigan Metal Works ---- Updates : Please Read.
jeebus @ mmw
+1y
Im still looking into this for ya!
Taylor
Taylor
smallblockmazda
+1y
Cool. Thanks. This is a prime example of why people do business with you..tons of help even after the purchase has been made.
jeebus @ mmw
+1y
Edited: 10/26/2012 12:45:07 AM by FXDGRND
Jeremy, im awaiting emails from several customers with these on there trucks. Soon as i get some pics, i will post them for ya. If you want, email me and i can keep in touch easier.
Just updating with some pics and random shit from the shop, dont even know how much this thread gets visited any more, the forum allways seems dead, but i try to keep this updated once a week or so.
We built some arms in a rush for a customer right before camp-n-drag this year, and he was very appreciative of the service, so much so that he decided to thank us with some air brush work on his truck that is getting re-painted.
Heres the truck before paint, and then a picture of the graphics in process:
Full set of 93 Mazda Arms, complete:
Welding up a storm this week:
some dakota arms leaving the shop:
some colorado fabricated drop spindles:
cummins cap was pretty cool looking on a set of arms:
his customer loved all the parts we made for his 1500 single cab truck so much, that he decided to build a 3500 crew cab, and use all of our parts again.
Jeremy, im awaiting emails from several customers with these on there trucks. Soon as i get some pics, i will post them for ya. If you want, email me and i can keep in touch easier.
Just updating with some pics and random shit from the shop, dont even know how much this thread gets visited any more, the forum allways seems dead, but i try to keep this updated once a week or so.
We built some arms in a rush for a customer right before camp-n-drag this year, and he was very appreciative of the service, so much so that he decided to thank us with some air brush work on his truck that is getting re-painted.
Heres the truck before paint, and then a picture of the graphics in process:
Full set of 93 Mazda Arms, complete:
Welding up a storm this week:
some dakota arms leaving the shop:
some colorado fabricated drop spindles:
cummins cap was pretty cool looking on a set of arms:
his customer loved all the parts we made for his 1500 single cab truck so much, that he decided to build a 3500 crew cab, and use all of our parts again.
dirtyd97
+1y
Love this thread keep it going Taylor !! Can't wait to get my arms !!!!
tre5
+1y
Must be nice to wear a sweatshirt while welding... we don't get that in AZ this time of year, lol
jeebus @ mmw
+1y
HA!
It was low 40s this morning when i cracked the bottle open for the TIG. Its only 60 now. Snow soon!
Taylor
It was low 40s this morning when i cracked the bottle open for the TIG. Its only 60 now. Snow soon!
Taylor
jeebus @ mmw
+1y
Just a regular update. Were closing in on 300k views to this thread, so... thats cool.
These are just some random pics posted to facebook during our last week. If your not following our "Like" page on facebook, your missing out, really. Its a fun time.
Anyways, here we go.
Been doing a lot of these colorado complete fabricated front end kits. they are popular lately.
did a set of custom C-10 arms for a porterbuilt dropmember. Did them in a really cool copper powder coat color. The powder coat has actual copper in it, so when its outside in the sun, it just looks great
Some uniquely colored ranger arms. Magenta over silver flake base:
Do what the magazines tell you to do, please :):
A customers dually proudly showing off his custom MMW dually arms:
actually we have been getting this quite a bit lately. Another customer showing off his MMW arms on his dually:
Some 1 ton dually arms, standard length and hub, wet black powder coat:
And then, just an awesome picture of the smoothster, which runs our Jeebus Joint s10 arms and tie rods.
These are just some random pics posted to facebook during our last week. If your not following our "Like" page on facebook, your missing out, really. Its a fun time.
Anyways, here we go.
Been doing a lot of these colorado complete fabricated front end kits. they are popular lately.
did a set of custom C-10 arms for a porterbuilt dropmember. Did them in a really cool copper powder coat color. The powder coat has actual copper in it, so when its outside in the sun, it just looks great
Some uniquely colored ranger arms. Magenta over silver flake base:
Do what the magazines tell you to do, please :):
A customers dually proudly showing off his custom MMW dually arms:
actually we have been getting this quite a bit lately. Another customer showing off his MMW arms on his dually:
Some 1 ton dually arms, standard length and hub, wet black powder coat:
And then, just an awesome picture of the smoothster, which runs our Jeebus Joint s10 arms and tie rods.
dirtyd97
+1y
Huge thanks to tylor for my custom built arms they turned out amazing !!! If anyone is thinking about getting a set of arms or spindles MMW is the only way to go!!!
The stRangeR
+1y
Im Going to order a set of toyota arms for my ranger next week. Cant wait to get them
jeebus @ mmw
+1y
Edited: 10/25/2012 7:27:35 AM by Chopped Mazda
Weekly update. Slow week for pictures, but so much happening in the shop. SEMA is next week and we still have last minute parts that customers wanted, so we are busting ass working on them.
We did a custom set of lower arms for a t-bird IRS setup. They were honestly some of the hardest ones we have had to build, but they turned out pretty dang good!
We also CNC machined a custom flange for a project Bobby over at Sadistic Iron Werks was working on, turned out super nice, and we took some videos as well, so make sure to check those out also.
http://youtu.be/75nAQHkw5UU
Some arms, some welds, and random stuff:
Weekly update. Slow week for pictures, but so much happening in the shop. SEMA is next week and we still have last minute parts that customers wanted, so we are busting ass working on them.
We did a custom set of lower arms for a t-bird IRS setup. They were honestly some of the hardest ones we have had to build, but they turned out pretty dang good!
We also CNC machined a custom flange for a project Bobby over at Sadistic Iron Werks was working on, turned out super nice, and we took some videos as well, so make sure to check those out also.
http://youtu.be/75nAQHkw5UU
Some arms, some welds, and random stuff:
