wire and plumbing hold downs

605 views
11 replies
9 following
K
wire and plumbing hold downs
ahab avatar
ahab
+1y
Im looking for some billet hold downs for wire or for the fuel and brake plumbing. Somthing that looks a little nicer than those rubber insulated things.
Uncle Fester avatar
Uncle Fester
+1y
Here is what I am using Andy. Let me know what you need I might have some left overs you can work with and see how you like them.

http://www.kugelkomponents.com/products/clamps/clamps.html
kaoss avatar
kaoss
+1y


So would you drill and tap your frame rail for the bolt?
post photo
ahab avatar
ahab
+1y
Those are perfect. i like the double sided ones too
Uncle Fester avatar
Uncle Fester
+1y
Yes Nathan, it also comes with some metal screws so you can mount it either way.
TwistedMinis avatar
TwistedMinis
+1y
I got some like that from Speedway. Seem cheaper. Not sure on a quality difference, never seen the Kugel ones.
corey0814 avatar
corey0814
+1y
they're pretty spendy, but where the wire bundles or lines have no where to connect, i used these. they look seamless when bolted together...

http://store.summitracing.com/egnsearch.asp?N=700+400106+115+4294924496



post photo
stewranger avatar
stewranger
+1y
The Kugel clamps are nice, use them all the time, Somewhat pricey but they are stainless and look killer polished.
stewranger avatar
stewranger
+1y
Edited: 10/9/2008 8:52:46 PM by stewranger

The clamps from Summit look like the Billet Specialties ones, you can do alot with these clamps as well.
kaoss avatar
kaoss
+1y
With the metal clamps, is there a problem with clamping steel lines? Like brake lines and fuel lines? I would worry about vibration rubbing through the steel lines, since it is metal on metal.