help wiring electric windows

reverse polarity just means the motor will turn the other direction when u wire it one way and then reverse when u wire it oposit....ill see if i can get the diagram scanned so i can email it to u...ill send u a 3 wire diagram and a 5 wire diagram...

this is a high current (two windows going at once is at least 30a) application so if you ran little itty bitty wire you are going to have problems with it overheating as it trys to pass the current.

You need a MINIMUM of 12 gauge if both windows are going at once.

^^^^^so very true...and also the seat bolts arent a really good place to ground things....man if u wanna come out to baytown ill wire them up for u....no charge man....

i dont think it is cus the wire. if that was the case i think the windows would atleast move, maybe they would get hot and burn up but the relays would atleast open. thats not even happening.

who knows man.

where at in baytown are ya?

12 guage wire is only rated for 20 amps

i live on the east side of baytown near the drag strip....

Edited: 5/15/2008 10:16:25 AM by ssc

We have window switches in stock and they are $20. Its real easy to wire them. No relays needed. Reverse polarity is built in the switch. You can call me anytime and I can walk you thru it. 662-342-6763

2 Black wires to groundRed wire to hotBlue and Green wire to the window motor