z 71 wheels on a 92 isuzu pup

how do get the center caps on the wheels with the grease cap being so big in the front is there a sercet to it

do i need to run wheel spacers or cut the spindle shank down a little bit to clear

bearing  buddy caps work and are flexable

if you REALLY want the caps then run wheel spacers and knock off the dust cap.

What did you do to get the center over the tabs on the hub?

you have to use 2 whell spacers 

in my pup i ran a 1/4" wheel spacer and ground the end of the spindle shaft down to the nut and beat the grease cap in to the spindle shaft